STK Professional Audio VM-8DRV, Руководство пользователя

Страница: 10 / 32

10
22. Master Monitor Control
This controls the overall signal level at the Monitor Line Out.
This setting is output to both the front and rear panel monitor
jacks and appears in the monitor bus signal.
23. Master Left/Main Bridge(Mono)
This control provides adjustment of signal to the left main output
connector, and serves as a volume control for the left internal
amplifier :
In Left+Right mode.
24. Master Right/Monitor
This control provides adjustment of signal to the right main
output connector, and serves as a volume control for the right
internal amplifier :
In Monitor mode.
25. DSP Switch
This push control activates/deactivates the DSP effects.
26. EFX To Mon
This master EFX control varies the amount of overall combined
signal of the independent channels sent to the Mon EFX bus.
27. EFX To Main
This master EFX control varies the amount of
overall combined signal of the independent channels
sent to the Main EFX bus.
28. Main/Monitor, Stereo Switch
This push button control routes either the mainhe
outputs left & right, through the left and right
graphic EQ section or sends the main mono signal
through the left graphic EQ section and a monitor
mono signal through the right graphic EQ sections.
29. Graphic Equalizer(Left/Main)
7 band graphic equalizers are provided on the
front panel and may be used for stereo or Left
/Main of VM11S-DRV, VRM11S-DRV.
30. Graphic Equalizer(Right/Monitor)
Two 7 band graphic equalizers are provided on the
front panel and may be used for stereo or Right
/Monitor of VM11S-DRV, VRM11S-DRV.
31. Phantom Power Switch
This push button control provides 48V of DC power
to the independent channel XLR inputs for the use of
condenser microphone without external battery.
32. Delay Time Adjust
This control adjusts the delay time .
33. Delay Time Range Select
This push control select delay time range from 50~350(msec)
to 350~1000(msec).
34. Delay Feedback Adjust
This control adjusts the delay feedback.
35. Delay Feedback Range Select
This push control select delay feedback range from
"0~45(%)" to " 45~90(%).
36. Reverb Time Adjust
This control adjusts the reverb time.
37. Reverb Time Range Select
This push control select reverb time range from "0.5~3.5(sec)"
to "3.5~10(sec)".
38. Reverb and Delay Mix Balance Adjust
This control adjust the reverb or delay mixing level
39. DSP Peak Indicator
Digital Signal Processor Function and Features
The STK digital reverbs gives the power to create
original sounds with a wide range of effects.
Effect patch(effect setting) can be stored in the
internal memory, calling up any patch is quick and
easy by linear potentiometer.
FEATURES
* Stereo-Effect preset available divided by
potentiometer.
* Easy program selection methods.
* Automatic input audio signal "overshooting"
indication
circuit on-board.
* Usage of a 1M byte SRAM for superior quality stereo
reverb and delay sound.
* Usage of the famous ASAHIKASEI 24bit DSP with
built
in 20 bit AD/DA stereo converter.
* 20bit delta sigma 64 x oversampling AD converter.
* 20bit delta sigma 128 x oversampling AD converter.
* 64 x oversampling ADC digital filter.
* 128 x oversampling DAC digital filter.
* CD-quality professional sound reality.
APPLICATIONS
* Long time delay and repeat for moslem church.
* Fantastic Karaoke sound system for Asian.
* Very clean and bright echo feedback and delay
for european karaoke vocal sound.
* Keyboard, guitar and combos.
Panel Descriptions