background image

10

MODEL: SASK80S | PRODUCT CODE: 708526 | 07/2022

Installation Instructions (cont.)

Finally, check if there are any loose parts or screws and that the slide-out drawer pulls out normally without 

any interference. If everything is okay, your installation is now complete.

The RCM Mark (Regulatory Compliance Mark) indicates that the product complies with the 

relevant guidelines of the ACMA as well as corresponding government requirements for the 

safety of electrical devices

1

www.xxxxxxx.com

0000 000 000

60cm/90cm Canopy Rangehood

Unfortunately, from time to time, faulty products are manufactured which need to be 
returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files 
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs 
stored on a portable media player, games saved on a games console or files stored on a USB 
memory stick) during the process of repair, some or all of your stored data may be lost. 

We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with 
refurbished goods of the same type or use refurbished parts in the repair process. 
Please be assured though, refurbished parts or replacements are only used where they 

meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your 
complaint. Please telephone us on 1300 11 43 57 or write to us at:
Residentia Group
1/32 Wangaratta St
Richmond VIC 3121
Australia
Email: [email protected]

Repair and Refurbished

Goods or Parts Notice

The front load washing machine must be installed 

on the ground and not on top of a clothes dryer.

Clothes 

Dryer

Washing 

Machine

Содержание SASK80S













Отзывы: