Setting up the appliance
1
A
Turn over for all the details on steaming
and ironing your garments ...
1
Quick Start Guide
Model: GSTT1100
Let’s get your new garment steamer
with ironing board ready to use!
This quick start guide contains basic instructions to get you started. For the full picture, please
refer to the supplied manual with comprehensive assembly, usage and safety advice.
CAUTION:
Do not plug the unit into the power supply until it is fully assembled!
A brief assembly sequence is listed below. You will find more comprehensive instructions
and illustrations on pages 12–15 in the manual.
Place the base on a flat surface. Loosen the locks at the sides of the pole insertion holes.
Take the ironing board out of the box. Insert the two poles firmly into the holes on the base,
making sure the board and the base wheels are facing the same position. Tighten the locks.
Fix the hanger to the top of the poles.
Loosen the pole locks and extend the poles to the
appropriate height, then tighten the locks.
Attach the steam head rest by slightly pressing it in place
in its space on the pole.
To unfold the ironing board, slightly pull the board out.
Then extend the front leg by gently pushing it out with
your foot to the maximum level.
Remove the water tank cap and fill 800 mL of purified or cold, boiled water
into the tank using the measuring beaker. Close the tank and tighten the cap
securely. Then rest the main steamer unit securely on the lug and put the
steam hose through the guide(s).
Place the steam head in the steam head rest.
2
1
3
4
5
6
7
8
2
3
4
5
6
7
8
9
9
B
A variety of uses
You can use your new appliance for steaming garments in
vertical (hanging) position as well as for ironing them on the
integrated ironing board. For refreshing curtains or furnishings
in situ,
you can also detach the main steamer unit from the
upright board structure and attach a shoulder strap for more
freedom of movement when using the appliance.
For all these different usage methods (explained overleaf),
please follow the simple operation steps below:
With the POWER switch in the OFF [ O ] position and the
STEAM
switch pulled back, plug in the appliance.
Set the power switch to the ON [ I ] position.
Let the appliance run for one minute,
then push the STEAM
switch forward to generate steam
for steaming or steam-ironing.
Pull back the STEAM
switch to stop steam production.
10
POWER switch
10
11
11
Push
forward
to release
steam
Pull
back
to stop
steam
STEAM
switch
