© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for „Pull over trainer“
Item-No. 55 1313 401
State: 28.01.2021 p. 3
1500
2500
1500
4500
3500
500
1535
650
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
Überzugtrainer
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
Rev
Änderung
Datum
1:25
A3
Name
Name
Draufsicht
2003-00-00
Maßstab
Schramm
20.02.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
9.
Create top soil with an even ground level.
Recommended surface material: optional, except sand
Attention:
The gap between the standing area and the foundation should be
filled completely to prevent a dropping of the top soil.
10.
Do not allow to use the equipment before the installation has been finished.
Attention:
If the fitness equipment has been incompletely installed or partly dis
-
mantled when carrying out maintenance and repair work, this may lead to particular
risks of injury for the user. For this reason, make clearly visible that the equipment
shall not be used in such cases.
NOTE:
Fitness equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub off and leave
small steel particles in combination with moisture brown rust stains.If such corrosion
occur on stainless steel parts, they are fine with an abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the components are
made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum fitness equipment over
a long period one should take care of maintenance of the stainless surface even
despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently cleaned
from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner (e.g.
on phosphoric acid) and rinse off with clear water after a short application time. Du
-
ring cleaning with mild abrasive components, only wipe over stainless steel surface in
polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone).
Diagram 3: Top view
movement area
exercise area
