background image

©  stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid  •  Tel. +49 (0) 2689 92790-0  •  All rights and product modifications reserved.

Mounting instructions for merry-go-round „curvus“ 

Item No. 51 4015 401

State: 18.05.2020 p. 3

 

·

6.  Cover the entire impact area with fall protection according to the required 

drop height in accordance with EN 1176-1.  

Critical drop height: 200 mm

 

Recommended surface material: grass, sand, wood chip, gravel, synth. fall 
protection

7.  Clean the foundation surface and place the pre-mounted play equipment onto 

the foundation anchor. Screw out the locking screw with hexagon socket from 

the roundabout bottom. Use the opening in the roundabout floor to screw the 

base plate of the play equipment onto the foundation anchor. After that close 
the opening in the roundabout bottom.

8.  Do not allow children to use the equipment before the installation has been 

finished.  

 

Attention:

 If the play equipment has been incompletely installed or partly dis-

mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the 
equipment shall not be used in such cases. 

NOTE:

 Play equipment, which contain components made of stainless steel 

should not come with „normal“ steel parts in contact. Those steel parts may rub 

off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are fine with an abrasive 

(240 grit) to remove.  
Please take care when transporting and setting up the fact that the components 
are made of stainless steel with no „normal“ steel parts in contact. 

Diagram 3: Top view 

5350

2018

OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE 

TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER 

ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER- 

WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

1

 

curvus

Benennung

Gepr.

Blatt

Datum

Projekt

Gez.

Zeichnungsnummer

Rev

Änderung

Datum

1:30

A3

Name

Name

Draufsicht

0203-00-00

Maßstab

Mattheis

22.07.16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gewerbegebiet Larsheck

56271 Kleinmaischeid

Deutschland

Area of the  

minimum space

Отзывы: