© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for merry-go-round „circulus 3“
Item No. 51 4013 401
State: 09.03.2017 p. 3
·
6. After a setting period of 10 – 14 days, depending on weather conditions and
foundation size, any existing gaps between the foundation and Foundation
hole with compacted fill and excavation.
7. Clean the surface of the foundation and put the pre-mounted play equipment
onto the foundation anchor. Screw out the locking screw with hexagon socket
from the roundabout bottom. Use the opening in the roundabout floor to
screw the base plate of the play equipment onto the foundation anchor. After
that, close the opening in the roundabout bottom.
8. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
9. Seal the foundation with the safety cover required for the height of fall indica-
ted. Set up impact-absorbing playground surfacing according to EN 1177 HIC
1000.
Critical drop height: 660 mm
Recommended surface material: grass, sand, wood chip, gravel, synth. fall
protection.
10. Do not allow children to use the equipment before the installation has been
finished.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
Diagram 3: Top view „circulus3“
5315
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER C KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM:
NAME:
WERKSTOFF
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
11.03.2016
Abmaße:
Fertigung:
Behnke
x
Gewicht:
Draufsicht
0057-00-00
circulus3
