State: 16.06.2021 p. 4
Mounting instructions for „Calisthenics“
Item-No. 55 1520 402
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
NOTE:
Fitness equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may
rub off and leave small steel particles in combination with moisture brown rust
stains.If such corrosion occur on stainless steel parts, they are fine with an
abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the compo
-
nents are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum fitness equipment
over a long period one should take care of maintenance of the stainless sur
-
face even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequent
-
ly cleaned from dirt and deposits due to air pollution and dirt caused by the
atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid clea
-
ner (e.g. on phosphoric acid) and rinse off with clear water after a short appli
-
cation time. During cleaning with mild abrasive components, only wipe over
stainless steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g.
ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again.
Do not use any chlorid or hydrochloric containing cleaning products nor scou
-
ring powder, bleaching - or silver polish cleaner. Cleaning intervals depend on
type and degree of soiling as well as on demands made on optical characte
-
ristics. Therefore cleaning is advisable at intervals of six to twelve months –
whereby in the case of strong soiling it is appropriate to clean the equipment at
intervals of three to six months.
Diagram 4: Top view
movement area
1500
1500
7400
7750
1655
1537
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
calisthenics (450)
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
Rev
Änderung
Datum
1:50
A3
Name
Name
Draufsicht
2020-00-00
Maßstab
Behnke
30.08.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
