Still SXH-20, Оригинальное руководство пользователя

Страница: 74 / 126

Transporting a load
Observe the following recommendations:
●
Drive forwards for optimum visibility
●
Travel up or down slopes with the load up-
hill Do not travel across the slope or make a
U-turn
●
Reverse travel is used for setting down the
load Adjust your speed, as the position of
the forklift operator is now less comfortable
●
Do not drive with an unstable load
●
If visibility is poor, let someone guide you
●
Raise the forks slightly in order to pass ob-
stacles
●
Be careful of low passageways, low door-
ways, scaffolding, pipes etc.
●
Check that the width of the load is not
greater than the width of the aisle
Setting a load down on the ground
Proceed as follows:
–
Drive the truck to the required location.
–
Carefully move the load into the unloading
zone.
–
Lower the load until the fork arms are freed.
–
Withdraw the machine in a straight line.
–
Raise the fork arms again several centime-
tres.
CAUTION
Risk of falling
Do not touch nearby loads or loads positioned be-
hind the truck.
CAUTION
Risk of accident
Before you set down the load, ensure that no one is
around the truck or the load.

Use
4
Transporting loads
64 11548011551 EN - 02/2021 - 07