Still RX70-40 Скачать руководство пользователя страница 258

Страница: 258 / 392

Operation

Trailer operation

7331_313-001

– Push the coupling pin (2) down, turn 90°

and pull out.

– Adjust tiller height.

DANGER

Persons may become trapped between the truck

and trailer.
When hooking up, ensure that no one is between

the truck and trailer.

– Slowly move the truck back.
– By moving the truck back, introduce the tiller

into the gap (3) of the counterweight.

DANGER

In the event of loss or destruction of the coupling pin

or the securing bush during towing, the trailer works

loose and becomes uncontrollable, meaning there

is a risk of accident!
– Use only original coupling pins that have been

checked for good condition.

– Ensure that the coupling pin is correctly inserted

and secured.

– Insert the coupling pin into the counter-

weight, press downwards against the spring

pressure and turn 90° (the coupling pin is

locked in this position).

– Remove any items used to prevent the

trailer from rolling away.

Uncoupling the trailer

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

246

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды