Still RX70-40 Скачать руководство пользователя страница 186

Страница: 186 / 392

Operation

Handling loads

6210_003-073_en

When load measurement has been performed

correctly, the determined load weight (3) is

shown on the display.

NOTE

If the load measurement is invalid, the value

"-9999 kg" is displayed in the operating unit.

Picking up loads

To make sure that the load is securely sup-

ported, it must be ensured that the fork arms

are sufﬁciently far apart and are positioned as

far as possible under the load.
If possible, the load should rest on the back of

the fork.
The load must not protrude too far over the

fork tips, nor should the fork tips protrude too

far out from the load.
Loads are to be picked up and transported as

close to the middle as possible.

DANGER

Risk of accident from a falling load!
When transporting small items, attach a load safety

guard (variant) to prevent the load from falling on

the driver.
A closed roof covering (variant) should also be

used.
Removable roof panels may not be removed.

174

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды