Still RX70-20/600, Оригинальное руководство пользователя

Страница: 420 / 432

Ergonomic dimensions
WARNING
Danger of impact injuries to the head!
If the head of the operator is located too close to the
underside of the roof, the suspension of the driver's
seat or an accident may cause the head to strike the
overhead guard.
To avoid head injuries, a minimum distance of
40 mm must be ensured between the underside of
the roof and the head of the tallest operator.
To determine the actual head clearance, the operator
must sit in the driver's seat and the seat suspension
must be set to this driver's requirements.
Due to the individual nature of height and body
weight as well as the wide variety of types of driver's
seat and overhead guard, the minimum head clear-
ance must be ensured in every truck.
The driver's compartment has been designed
taking ergonomics in the workplace into ac-
count and in accordance with EN ISO 3411. In
general, from the seat position, the operator
has sufficient space to reach the operating de-
vices safely, to operate the truck and to view
the outline of the truck. Operators whose body
size deviates from the specified dimensions
on which EN ISO 3411 is based must be indi-
vidually considered by the operating company.
0000_003-002
40 mm

Technical data
6
Ergonomic dimensions
406 57368011501 EN - 10/2020 - 04