Still RX70-16, Оригинальное руководство пользователя

Страница: 309 / 380

Operation
4
Shutdown
– Regularly check the charge state of the
battery and recharge if necessary.
– Apply a suitable contact spray to all exposed
electrical contacts.
– Preserve the engine as specified by the
manufacturer.
– Cover the truck with vapour permeable
materials, such as cotton, in order to protect
against dust.
– If the truck is to be shut down for even
longer periods, contact your authorised
service centre to find out about additional
measures.
Returning to service after storage
If the truck has been in storage for longer than
six months, it must be carefully checked before
being put back into service. As in the annual
inspection, this check should also include all
safety items for the truck.
– Clean the truck thoroughly.
– Oil joints and controls.
– Check battery condition and acid density;
recharge if necessary.
– Restore engine to normal condition accord-
ing to regulations of engine manufacturer.
– Check hydraulic oil for condensation water;
change if necessary.
– Perform maintenance work as before initial
start-up.
– Put the truck into operation.
During start-up, check in particular:
• Drive, control, steering
• Brakes (service brake, parking brake)
• Lifting system (load-carrying equipment,
load chains, mounting)
174749 EN - 03/2017 297