Still RX60-60, Оригинальное руководство пользователя

Страница: 60 / 408

Safety tests
Regular safety inspection of the
truck
Safety inspection based on time and ex-
traordinary incidents
The operating company must ensure that the
truck is checked by a specialist at least once a
year or after particular incidents.
As part of this inspection, a complete check of
the technical condition of the truck must be
performed with regard to accident safety. In
addition, the truck must be thoroughly
checked for damage that could potentially
have been caused by improper use. A test log
must be created. The results from the inspec-
tion must be retained until a further two in-
spections have been carried out.
The inspection date is indicated by an adhe-
sive label on the truck.
–
Arrange for the service centre to perform
periodic safety inspections on the truck.
–
Observe guidelines for checks carried out
on the truck in accordance with FEM 4.004.
The operator is responsible for ensuring any
defects are remedied without delay.
–
Contact your service centre.
NOTE
Observe the national regulations for your
country!
Insulation testing
The insulation of the truck must have sufficient
insulation resistance. For this reason, insula-
tion testing in accordance with DIN EN 1175
and DIN 43539, VDE 0117 and VDE 0510
must be conducted at least once yearly as
part of the FEM testing.

Safety
2
Safety tests
48 56358042501 EN - - 11