Still RX60-60, Оригинальное руководство пользователя

Страница: 167 / 408

Triplex lift mast (variant)
During lifting, the inner lift cylinder moves up
to free lift (3), and then the outer lift cylinders
raise the inner lift mast up to the max. height
(2).
DANGER
Risk of accident due to collision of the lift mast or
load with low ceilings or entrances.
–
Note that the inner lift mast or load may be higher
than the fork carriage.
–
Note the heights of ceilings and entrances.
Malfunctions during lifting mode
Incorrect extension sequence
DANGER
Risk of accidents!
With triple masts (variant), an incorrect extension se-
quence may occur, i.e. the inner lift mast may extend
before the free lift has finished. As a result, the over-
all height is exceeded and damage may occur in
passageways or from low ceilings.
An incorrect extension sequence may, for in-
stance, result from:
●
The hydraulic oil temperature being too low.
●
The fork carriage becoming blocked in the
inner lift mast.
●
Blocking of the free lift cylinder.
●
The chain roller becoming blocked at the
free lift cylinder.
–
If the hydraulic oil temperature is too low,
slowly actuate the lift mast functions several
times in order to raise the oil temperature.
In the event that the fork carriage is blocked in
the inner lift mast, or the free lift cylinder or
chain roller are blocked, the cause of the
blockage must be eliminated before resuming
work.
–
Notify your service centre
6210_810-002
2
3

Operating
4
Lifting
155 56358042501 EN - - 11