Still RX60-35/600, Оригинальное руководство пользователя

Страница: 453 / 470

Technical data
6
Information about the lead-acid battery
Information about the
lead-acid battery
CAUTION
The battery weight and the battery dimensions
affect the stability of the truck.
When replacing the battery, the weight ratios
must not be changed. The battery weight must
remain within the weight range specified on the
nameplate. The location of ballast weights must not
be changed. The bottom of the battery tray must be
closed.
– Use batteries that meet DIN standards.
– Do not change the position of ballast weights.
– Check the battery weight against the information
on the nameplate.
– Only use a battery tray that is closed at the
bottom.
NOTE
Battery specifications according to DIN 43535;
cells in accordance with DIN EN 60254-2,
80-V circuit A.
– The battery weight can be found on the
nameplate of the battery.
RX60-40 (6327), RX60-45 (6328), RX60-50 (6329), RX60-50/600 (6330), RX60-35/600 (6367),
RX60-40/600 (6368), RX60-45/600 (6369)
Battery compartment dimensions [mm] Battery
designation
Capacity
[Ah]
Depth
Width
Height
Tray
5 PzV 600 600
5 PzW 700
HAWKER
®
wf 200plus
700
5 PzS 700 700
5 PzS 775 775
5 CSM 800 800
TENSOR
®
TCSM 1620
840
1028 855 784 235
171533 EN - 02/2019 - 19 439