Still RX60-35/600 Скачать руководство пользователя страница 40

Страница: 40 / 470

Safety

Deﬁnition of responsible persons

Operating company

The operating company is the natural or legal

person or group who operates the truck or on

whose authority the truck is used.
The operating company must ensure that the

truck is only used for its proper purpose and in

compliance with the safety regulations set out

in these operating instructions.
The operating company must ensure that

all users read and understand the safety

information.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
We recommend that the national performance

speciﬁcations are adhered to.

Specialist

A qualiﬁed person is deﬁned as a service

engineer or a person who fulﬁls the following

requirements:
• A completed vocational qualiﬁcation that

demonstrably proves their professional

expertise. This proof should consist of

a vocational qualiﬁcation or a similar

document.

• Professional experience indicating that

the qualiﬁed person has gained practical

experience of industrial trucks over a

proven period during their career During

this time, this person has become familiar

with a wide range of symptoms that require

checks to be carried out, such as based

on the results of a hazard assessment or a

daily inspection

• Recent professional involvement in the

ﬁeld of the industrial truck test in question

and an appropriate further qualiﬁcation

are essential. The qualiﬁed person must

have experience of carrying out the test

in question or of carrying out similar tests.

Moreover, this person must be aware of

the latest technological developments

171533 EN - 02/2019 - 19

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды