Still RX60-35/600, Оригинальное руководство пользователя

Страница: 375 / 470

Operation
4
Transporting the truck
DANGER
Risk of accident from the truck crashing!
Steering movements can cause the tail end to veer
off the loading bridge towards the edge. This may
cause the truck to crash.
– Before driving over a loading bridge, ensure that
it is installed and secured properly.
– Ensure that the transport vehicle to be driven
onto has been sufficiently secured against
moving.
– Maintain a safety distance from edges, loading
bridges, ramps, working platforms etc.
– Drive slowly and carefully onto the transport
vehicle.
6210_001-012_V3
Setting chocks
– Secure the truck from rolling away by
placing a wheel chock in front of each front
wheel and behind each back wheel (1).
– Park the truck securely.
CAUTION
Risk of component damage!
If you remove the battery male connector when the
key switch is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens their service life.
– Switch off the key switch before the battery male
connector is disconnected.
– Only disconnect the battery male connector with
the key switch switched on in an emergency.
– Ensure that the key switch is switched off.
– Disconnect the battery male connector.
NOTE
If the electric parking brake (variant) cannot be
triggered electrically, it must be applied ma-
nually; see the chapter entitled "Emergency
operation of the electric parking brake".
171533 EN - 02/2019 - 19 361