Still RX60-35/600, Оригинальное руководство пользователя

Страница: 218 / 470

4
Operation
Attachments
Load capacity with attachment
The permissible load capacity of the attach-
ment and the allowable load (load capacity
and load moment) of the truck must not be ex-
ceeded by the combination of attachment and
payload. The specifications of the manufac-
turer and supplier of the attachment must be
complied with.
– Observe the residual load capacity rating
plate, see the chapter entitled "Taking up a
load using attachments".
7090_900-001
Releasing the pressure from the
hydraulic system
WARNING
The movements of the load lift system present a
risk of crushing.
During the process described below, the fork
carriage or the lift mast can only be moved slightly.
– Do not reach into or stand below the components
of the load lift system.
Non-clamping attachments are connected
to the third hydraulic circuit via the plug
connectors on the fork carriage and are
controlled via the "5th hydraulic function".
– Before fitting attachments, the pressure
must be released from the plug connectors
(arrows) and the other hydraulic circuits.
Attachments must only be installed by compe-
tent persons. The specifications provided by
the manufacturer and supplier of the attach-
ments must be observed during installation of
the attachments.
– Before each use of the attachment, check
and ensure the functions of the installed
attachment.
204 171533 EN - 02/2019 - 19