Still RX60 35-50, Оригинальное руководство пользователя

Страница: 498 / 596

Replacing the battery using an
electric battery carrier (variant)
DANGER
Risk of explosion if the battery is not extended!
The battery carrier reduces the space between the
battery and the battery hood. During charging, lead-
acid batteries generate explosive oxyhydrogen gas.
Sufficient quantities of this gas must be removed
from the truck. This gas can only be removed if
the battery is fully extended for the entire charging
process. Charging a lead-acid battery within the truck
is not permitted.
–
Fully extend the battery when charging.
DANGER
The battery weight and dimensions affect the stabil-
ity of the truck.
The weight ratios must not be changed when replac-
ing the battery. The battery weight must remain with-
in the weight range specified on the nameplate. The
location of ballast weights must not be changed.
Prerequisites
WARNING
Risk of injury when extending the battery.
The battery is extended out into the marked area (1).
People must not stand in this area.
The area (1) extends over the width of the battery
compartment and the extension range of the battery
carrier.
–
Only stand in the operator's position (2).
The following prerequisites must be fulfilled
when replacing a battery using an electric bat-
tery carrier:
●
The extension area (1) must be free of ob-
stacles
●
The ground must be firm, clean and even
●
The fork must be safely set down on the
ground
●
The parking brake must be applied (A)
●
The emergency off switches on the driver's
compartment and next to the operating de-
vice for extending and retracting the battery
carrier on the counterweight must be un-
locked
6301_003-149

Operating
4
Replacing and transporting the battery
482 56388011501 EN - 05/2022 - 08