Still RX60 35-50, Оригинальное руководство пользователя

Страница: 487 / 596

Special notes for installing the
lithium-ion battery
With the exception of the following special
notes, lithium-ion batteries are replaced in the
same way as lead-acid batteries.
–
Push down the lifting eyes before inserting
the battery into the battery compartment.
Make sure that the lifting eyes do not pro-
trude.
The lifting eyes may bend in the event of a
collision with the truck chassis.
–
Install the lithium-ion battery with the dis-
play facing the outside of the truck so that
it can be read when the battery door or bat-
tery cover is open.
–
Lay the battery cable on the battery. Make
sure that the cable does not come into con-
tact with the truck chassis during installa-
tion.
Replacing the battery using a
truck
Preparing
WARNING
Risk of accident!
The load capacity of the truck in use must at least
match the battery weight (see the battery name-
plate).
–
Observe the nameplates of the battery and of the
change frame.
–
Before picking up the battery, the fork arms
must be adjusted to match the opening
in the chassis (A). Push the fork arms to-
gether, selecting the maximum possible dis-
tance.
The fork arms must not be moved under the
battery any further than the length of the chas-
sis opening (B = max. 850 mm).
It is useful to mark this measurement (B)
(measured from the fork tips) on the fork arms.

6219_003-123
A

Operating
4
Replacing and transporting the battery
471 56388011501 EN - 05/2022 - 08