Still RX60 35-50, Оригинальное руководство пользователя

Страница: 341 / 596

Controlling attachments using
multi-lever operation and the 5th
and 6th function
The function keys for the "5th and 6th func-
tion" (1, 2) and the operating levers (3, 4)
are used to control the "5th function" or the
"6th function".
The central and bottom parts of the picto-
grams on each operating lever show the func-
tion that is activated by that lever. The top
part of the pictogram shows that the attach-
ment is equipped with the "5th function" or the
"6th function".
The following applies:
–
Move the operating lever (3, 4) forwards.
The attachment moves in the direction of
movement shown in the central part of the
pictogram.
–
Move the operating lever (3, 4) backwards.
The attachment moves in the direction of
movement shown in the lower part of the pic-
togram.
–
Press and hold the switch (1).
The additional function of the attachment
is activated and can be controlled as the
"5th function" with the operating lever (4).
NOTE
The movement/action of the "5th function" can
be found in the operating instructions of the
attachment that is fitted.
–
Press and hold the switch (2).
The additional function of the attachment
is activated and can be controlled as the
"5th function" or "6th function" with the operat-
ing lever (3).
NOTE
The movement/action of the "5th function" or
"6th function" can be found in the operating
instructions of the attachment that is fitted.
4 3
1
2
6219_003-118_V3

Operating
4
Attachments
325 56388011501 EN - 05/2022 - 08