Still RX60 35-50, Оригинальное руководство пользователя

Страница: 332 / 596

General instructions for control-
ling attachments
Attachments can be controlled via the first four
hydraulic functions but also as a variant via
the 5th or 6th function. The 5th or 6th function
is activated via a button on the operating de-
vice and by moving the operating device or
additional push buttons.
The way in which attachments (variant) are
controlled depends on the operating devices
included in the truck's equipment.
Possible equipment variants include:
●
Multi-lever
●
Multi-lever with a 5th or 6th function (var-
iant)
●
Double mini-lever
●
Double mini-lever with a 5th function (var-
iant)
●
Triple mini-lever
●
Triple mini-lever with a 5th function (variant)
●
Quadruple mini-lever
●
Quadruple mini-lever with a 5th function
(variant)
●
Fingertip
●
Fingertip with a 5th function (variant)
●
Joystick 4Plus
●
Joystick 4Plus with a 5th function (variant)
–
To control attachments, see the sections re-
lating to the respective operating devices in
this chapter.
WARNING
Use of attachments can give rise to additional haz-
ards such as a change in the centre of gravity, addi-
tional danger areas etc.
Attachments must only be deployed for their inten-
ded use as described in the relevant operating in-
structions. Drivers must be taught how to operate the
attachments.
Loads may only be picked up and transported with
attachments if the loads are securely grasped and at-
tached. If necessary, the loads must also be secured
against slipping, rolling away, falling over, swinging
and tipping over. Note that any change to the loca-
tion of the load centre of gravity will affect the stabili-
ty of the truck.
–
Observe the capacity rating plate for the attach-
ments being used.
Operating
4
Attachments
316 56388011501 EN - 05/2022 - 08