Still RX60 35-50, Оригинальное руководство пользователя

Страница: 325 / 596

Depressurising the hydraulic circuits for
the "5th hydraulic function"
If the truck has a "5th hydraulic function",
the hydraulic circuit of this function must al-
so be depressurised. The procedure is simi-
lar to the depressurisation of the hydraulic cir-
cuits for the basic functions and the additional
functions. In addition, the hydraulic circuit is
depressurised in the same way as the attach-
ments are operated. The hydraulic circuit for
the "5th hydraulic function" is actuated using
the function key for the "5th function" (2). The
operating levers (1) or (4) can be assigned the
5th function. Observe the relevant pictogram
for the 5th function.
–
Actuate the function key for the "5th func-
tion" (2).
The LED for the "5th function" (3) lights up.
–
Push the operating levers (1) or (4) once
in the direction of the arrow until the end
position is reached.
The hydraulic circuit of the 5th hydraulic func-
tion is depressurised. The plug connectors on
the lift mast are depressurised.
–
Actuate the function key for the "5th func-
tion" (2).
The LED for the "5th function" (3) goes
out.
Completing the depressurisation
–
To complete the depressurisation, observe
the section entitled "Exiting the wizard".
Depressurising the hydraulic
system using the Joystick 4Plus
–
Start the "wizard for depressurising the hy-
draulic system".
1 2 3
4
6219_003-20 4 _V2
6219_003-238

Operating
4
Depressurising the hydraulic system
309 56388011501 EN - 05/2022 - 08