Still RX60 35-50, Оригинальное руководство пользователя

Страница: 316 / 596

The hydraulic circuits of the basic functions
are now depressurised.
Depressurising the hydraulic circuits for
the additional functions
The additional features include features such
as the sideshift and fork adjustment. Clamping
attachments are also connected to these hy-
draulic circuits. These functions are controlled
via hydraulic circuits three and four.
–
Actuate the operating levers (3, 4) for con-
trolling the additional functions once in the
direction of the arrow until the end positions
are reached.
The hydraulic circuits of the additional func-
tions are now depressurised.
NOTE
Depending on the equipment, the operating
lever (2) can be assigned the sideshift and the
fork adjustment functions.
–
In this case, press the button (1) and hold it
down.
–
Push the operating lever (2) once in the
direction of the arrow until the end position
is reached.
–
Release the button (1).
The hydraulic circuits of the sideshift and fork
adjustment are now depressurised. The plug
connectors on the lift mast are depressurised.
Completing the depressurisation
–
To complete the depressurisation, observe
the section entitled "Exiting the wizard".
Depressurising the hydraulic
system using multi-lever opera-
tion and the 5th and 6th function
If the truck is equipped with multi-lever opera-
tion, the attachments can also be controlled
via the "5th hydraulic function" and "6th hy-
draulic function".
6219_003-250
2
3
4
1

Operating
4
Depressurising the hydraulic system
300 56388011501 EN - 05/2022 - 08