Still RX60 35-50, Оригинальное руководство пользователя

Страница: 288 / 596

Tilt angle-dependent assistance systems
Mast tilt angle display (variant)
Knowing the actual tilt angle of the lift mast
makes it easier to place loads into stock and
remove loads from stock. If the truck is equip-
ped with the "mast tilt angle display" assis-
tance system, the lift mast tilt angle (1) is
shown on the display.
NOTE
When replacing worn-out pairs of tyres or
when the front and rear tyres are worn to dif-
ferent levels, the mast tilt angle display must
be zeroed.
–
See the section entitled "Zeroing the assis-
tance systems".
Tilt end stop damping (variant)
This assistance system ensures that the
movement to the end positions is smooth. This
protects the load against jerking movements.
Automatic mast vertical position-
ing (variant)
CAUTION
Risk of damage to property due to the lift mast collid-
ing with racks or other objects!
–
Before using the "automatic mast vertical position-
ing" assistance system, position the truck at a suf-
ficient distance from racks and other objects.
The "automatic mast vertical positioning" as-
sistance system can be used to set down
the goods so that the goods are exactly ver-
tical, e.g. paper rolls. This prevents damage
when setting down the load. "Automatic mast
vertical positioning" functions when tilting for-
wards. A further variant is available which al-
so functions when tilting backwards. The tilt
cylinders run into the end stops gently to pre-
vent hard vibrations and impacts. Oscillating
motions of the truck are minimised, thus in-
creasing work safety. Automatic mast vertical
1,6 t
2,71
m
7,0°


Operating
4
Tilt angle-dependent assistance systems
272 56388011501 EN - 05/2022 - 08