Still RX60 35-50, Оригинальное руководство пользователя

Страница: 230 / 596

Tilting the lift mast
To tilt the lift mast forwards:
–
Move the "tilting" operating lever (1) in the
direction of the arrow (C).
To tilt the lift mast backwards:
–
Move the "tilting" operating lever (1) in the
direction of the arrow (D).
Movements of the lifting system and
meanings of the pictograms
A Lowering
B Lifting
C Tilting forwards
D Tilting backwards
Controlling the lifting system us-
ing the Joystick 4Plus
DANGER
Reaching into or climbing between moving parts
of the truck (e.g. lift mast, sideshifts, working equip-
ment, load carrying devices etc.) can lead to seri-
ous injury or death and is therefore prohibited.
–
Observe the safety regulations for handling loads.
–
Operate the lifting system from the driver's seat
only.
WARNING
Risk of accident as a result of an operating error!
These operating instructions describe how to operate
the lifting system in the factory configuration.
If the authorised service centre has configured a dif-
ferent configuration, the newly applied pictograms
must be observed to ensure safe operation. The
operating company must make all drivers aware of
the fact that a different configuration has been con-
figured.
–
Observe the pictograms on the operating levers.
–
Before use, check that the hydraulic functions are
working correctly.
The lifting, lowering and tilting movements
of the lift mast are controlled using the Joy-
stick 4Plus (1). The adhesive labels bearing
the pictograms for the hydraulic functions are
located in positions (2) and (4).
Operating
4
Lifting
214 56388011501 EN - 05/2022 - 08