Still RX60 35-50, Оригинальное руководство пользователя

Страница: 223 / 596

Controlling the lifting system us-
ing a double mini-lever
DANGER
Reaching into or climbing between moving parts
of the truck (e.g. lift mast, sideshifts, working equip-
ment, load carrying devices etc.) can lead to seri-
ous injury or death and is therefore prohibited.
–
Observe the safety regulations for handling loads.
–
Operate the lifting system from the driver's seat
only.
WARNING
Risk of accident as a result of an operating error!
These operating instructions describe how to operate
the lifting system in the factory configuration.
If the authorised service centre has configured a dif-
ferent configuration, the newly applied pictograms
must be observed to ensure safe operation. The
operating company must make all drivers aware of
the fact that a different configuration has been con-
figured.
–
Observe the pictograms on the operating levers.
–
Before use, check that the hydraulic functions are
working correctly.
The lifting, lowering and tilting movements
of the lift mast are controlled using the "lift
mast" 360° lever (3). The adhesive label
bearing the pictograms for the hydraulic func-
tions (1) or (2) is affixed at the designated
point (4).
The pictograms are arranged according to the
direction of movement of the "lift mast" 360°
lever (3).
NOTE
●
The truck is configured at the factory in ac-
cordance with the adhesive label (1). The
following steps for moving the fork carriage
and lift mast are based on this configura-
tion.
●
The configuration according to the adhesive
label (2) with reversed functional axes can
be ordered as a variant.
6219_003-044_V3
D C
C
B
B
A
A
D

Operating
4
Lifting
207 56388011501 EN - 05/2022 - 08