Still RX60 25-35, Оригинальное руководство пользователя

Страница: 58 / 518

office must comply with the standards and
directives valid at the time that modifica-
tions are made.
Decal information with the following data must
be permanently affixed to the truck so that it is
clearly visible:
●
Type of modification
●
Date of modification
●
Name and address of the company per-
forming the modifications
Changes to the overhead guard and
roof loads
DANGER
In the event of the overhead guard failing due to a
falling load or the truck tipping over, there are po-
tentially fatal consequences for the driver. There is
a risk to life!
Welding and drilling on the overhead guard changes
the material characteristics and the structural design
of the overhead guard. Excessive forces caused by
falling loads or the truck tipping over may result in
buckling of the modified overhead guard and no pro-
tection for the driver.
–
Do not perform welding on the overhead guard.
–
Do not perform drilling on the overhead guard.
CAUTION
Heavy roof loads damage the overhead guard!
To ensure the stability of the overhead guard at all
times, a roof load may only be mounted on the over-
head guard if the structural design has been tested
and the manufacturer has given approval.
–
Seek advice from the authorised service centre for
the mounting of roof loads.
Warning regarding non-original
parts
Original parts, attachments and accessories
are specially designed for this truck. We spe-
cifically draw your attention to the fact that
parts, attachments and accessories supplied
by other companies have not been tested and
approved by STILL.
Safety
2
Basic principles for safe operation
44 56378011526 EN - 03/2021 - 01