Still RX60 25-35 Скачать руководство пользователя страница 56

Страница: 56 / 518

Basic principles for safe operation

Insurance cover on company prem-

ises

In many cases, company premises are restric-

ted public traffic areas.

NOTE

The business liability insurance should be re-

viewed to ensure that, in the event of any

damage caused in restricted public traffic

areas, there is insurance cover for the truck in

respect of third parties.

Modifications and retrofitting

DANGER

Risk of explosion!
Decommissioning or modification of ex-

plosion-protection components is forbid-

den.

If the truck will be used for work that is not lis-

ted in the directives or in these instructions,

the truck must be converted or retrofitted by

the authorised service centre as required. Any

structural modification can impair the handling

and stability of the truck, and can result in ac-

cidents.
Any modifications that adversely affect the

stability, the load capacity or the all-round visi-

bility of the truck require written approval from

the manufacturer. If necessary, obtain appro-

val from the relevant authorities.
The following components may only be modi-

fied with prior written approval from the manu-

facturer:

●

Brakes

●

Steering

●

Operating devices

●

Safety systems

●

Equipment variants

●

Attachments

Safety

Basic principles for safe operation

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды