Still RX60 25-35 Скачать руководство пользователя страница 481

Страница: 481 / 518

1000-hour maintenance/annual maintenance

Other work that must be carried out

–

Perform all tasks required to maintain full

operability; see the chapter entitled "Re-

maining ready for operation".

Checking the lift cylinders and con-

nections for leaks

WARNING

Risk of injury
Observe safety regulations for working on the lift

mast, see the "Working at the front of the truck"

chapter.

–

Check hydraulic connections and lift cylin-

ders for leaks (visual inspection).

–

Have leaking screw joints or leaking hy-

draulic cylinders repaired by the authorised

service centre.

Checking the fork arms

DANGER

Risk of explosion!
If fork arms are used that do not corre-

spond to the explosion-protection regula-

tions, this can lead to spark formation,

resulting in explosions in the surrounding

atmosphere.

–

Only use fork arms that are approved

for use in potentially explosive areas

according to the nameplate of the

truck.

–

If the cladding is worn, do not operate

the truck in potentially explosive

areas.

The fork arms (1) are specially coated to pre-

vent sparks forming when coming into contact

with the load or the ground. The cladding on

the fork arms has six inspection holes (2) on

the top and the bottom. These inspection

7094_810-004



Maintenance

1000-hour maintenance/annual maintenance

467

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды