Still RX60 25-35 Скачать руководство пользователя страница 324

Страница: 324 / 518

Controlling attachments using the

triple mini-lever and the 5th function

NOTE

For technical reasons, clamping attachments

must not be controlled via the "5th function".

The function key for the "5th function" (2) and

the operating lever (1) are used to control the

"5th function".
The adhesive label bearing the pictograms for

the hydraulic functions (3) is affixed at the

designated point.

–

If the adhesive label becomes illegible or is

missing, please contact your authorised

service centre.

–

Observe the pictograms for the attachment

functions on the adhesive label (3).

The pictograms on the operating lever show

the respective functions that are activated by

this lever.
The following applies:

–

Actuate the function key for the "5th func-

tion" (2).

The LED for the "5th function" lights up.

–

Move the operating lever (1) in the direc-

tion (E) or (F).

The attachment moves accordingly in the di-

rections (E) or (F) as shown in the pictogram.

6219_003-050_V3



Operating

Attachments

310

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды