Still RX60 25-35 Скачать руководство пользователя страница 252

Страница: 252 / 518

DANGER

Risk of accident!
When transporting suspended loads, never perform

or end driving and load movements abruptly.
Never drive on slopes with a suspended load.
Transporting containers holding fluids as hanging

loads is not permitted.

Transporting swinging loads

DANGER

Risk of explosion from spark discharge!
Suspended loads can swing uncontrolla-

bly.
The load can strike against components

or scrape along the ground.
This can cause sparks to be discharged,

which in potentially explosive areas may

lead to explosions in the surrounding at-

mosphere.
Transportation of swinging loads is not

permitted.

–

Do not transport swinging loads.

Picking up a load

DANGER

There is a risk to life from a falling load or from

truck components being lowered.

–

Never walk or stand underneath suspended loads

or raised fork arms.

–

Never exceed the maximum load values specified

on the capacity rating plate. Otherwise, stability

cannot be guaranteed.

–

Only store pallets that do not exceed the

specified maximum size. Damaged loading

equipment and incorrectly formed loads

must not be stored.

–

Attach or secure the load to the lifting ac-

cessory so that the load cannot move or

fall.

–

Store the load so that the specified aisle

width is not reduced by protruding parts.

Operating

Handling loads

238

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды