Still RX60 25-35 Скачать руководство пользователя страница 122

Страница: 122 / 518

NOTE

When the emergency off switch is actuated,

note the following:

●

The electric brake is disabled. The truck no

longer responds to the command issued by

the accelerator pedal.

●

The power steering is no longer available.

Steering forces are increased due to the re-

maining emergency steering function.

–

Release the accelerator pedal.

–

Apply the parking brake.

The truck must decelerate and remain station-

ary.

–

If the truck only coasts and does not decel-

erate or decelerates only slightly, stop the

truck using the service brake.

–

Secure the truck with chocks so that the

truck does not roll away.

–

Have the parking brake checked and re-

paired by the authorised service centre.

NOTE

Special features of the electric parking brake:

●

The deceleration cannot be influenced.

●

The electric parking brake is applied moder-

ately until the truck comes to a stop.

●

The emergency off switch must be unlocked

to release the electrical parking brake.

Warming up the hydraulic oil at cold

ambient temperatures

If the truck has been exposed to low ambient

temperatures for an extended period, because

it has been parked outside during winter, for

example, the hydraulic oil has a low tempera-

ture. In order to ensure smooth and safe oper-

ation of the hydraulic functions, the hydraulic

oil must be at operating temperature.

–

Drive the truck for approximately 5 minutes

and actuate the brake several times.

Operating

Checks and tasks before daily use

108

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды