Still RX60 25-35 Скачать руководство пользователя страница 109

Страница: 109 / 518

Depending on the tyres used, the truck is

fitted with one or more antistatic belts (3)

and/or with a corona electrode (4). These

components ensure that the truck cannot

charge statically.

–

Do not use the truck if there is any damage

or defects.

–

In this case, contact your authorised service

centre.

Any other necessary tasks are summarised

under their own headings, e.g. adjusting the

driver's seat.

DANGER

Insufficient explosion protection carries

a risk of explosion!
If the explosion-protection components

are defective or no longer present, do

not operate the truck in potentially explo-

sive areas.

–

Notify the authorised service centre.

Climbing into and out of the truck

WARNING

Risk of injury when climbing into and out of the truck

due to slipping, striking parts of the truck or becom-

ing stuck!
If the footwell cover is very dirty or smeared with oil,

there is a risk of slipping. There is also a risk of hit-

ting your head on the post of the overhead guard or

of your clothes becoming stuck when climbing out of

the truck.

–

Ensure that the footwell cover is not slippery.

–

Do not jump into or out of the truck.

–

Ensure that you have a secure grip on the truck.

Antistatic belt and corona electrode



Operating

Checks and tasks before daily use

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды