Still RX60-16 Скачать руководство пользователя страница 53

Страница: 53 / 412

Safety

Safety regulations for handling consumables

WARNING

These ﬂuids are pressurised during

operation of the truck and are

hazardous to your health.
– Do not allow the ﬂuids to come into

contact with the skin.

– Avoid inhaling spray.
– Penetration of pressurised

ﬂuids into the skin is particularly

dangerous if these ﬂuids escape

at high pressure due to leaks in

the hydraulic system. In case of

such injury, immediate medical

assistance is required.

– To avoid injury, use appropriate

personal protective equipment

(e.g. protective gloves, industrial

goggles, skin protection and skin

care products).

ENVIRONMENT NOTE

Hydraulic ﬂuid is a water-polluting substance.

•

Always store hydraulic ﬂuid in containers

that comply with regulations

•

Avoid spills

•

Spilt hydraulic ﬂuid should be removed

immediately with oil-binding agents and

disposed of according to the regulations

•

Dispose of old hydraulic ﬂuid according to

the regulations

Battery acid

WARNING

Battery acid contains dissolved

sulphuric acid. This is toxic.
– Avoid touching or swallowing the

battery acid at all costs.

– In case of injury, seek medical

advice immediately.

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды