Still RX60-16 Скачать руководство пользователя страница 41

Страница: 41 / 412

Safety

Essentials for safe operation

Insurance cover on company

premises

In many cases, company premises are

restricted public trafﬁc areas.

NOTE

The business liability insurance should be

reviewed to ensure that, in the event of any

damage caused in restricted public trafﬁc

areas, there is insurance cover for the truck in

respect of third parties.

Changes and retroﬁtting

If the truck is used for work that is not listed

in the guidelines or in these instructions and

has to be converted or retroﬁtted accordingly,

you must note that any change to its structural

state can affect the handling and stability of

the truck, which in turn can lead to accidents.
You should therefore contact your service

centre beforehand.
Changes that will adversely affect stability,

load capacity and safety systems, among

other things, must not be made without the

manufacturer’s approval.
The truck can only be converted with written

approval from the manufacturer. Approval

from the responsible authority must be ob-

tained if necessary.
Changes to the brakes, steering, control

elements, circumferential view, equipment

variants (e.g. attachments) must also not be

made without the prior written approval of the

manufacturer.
We warn against the installation and use

of restraint systems not approved by the

manufacturer.

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды