Still RX60-16 Скачать руководство пользователя страница 396

Страница: 396 / 412

Technical data

Ergonomic dimensions

0000_003-002

40 mm

Ergonomic dimensions

WARNING

Danger of impact injuries to the head!
If the head of the operator is located too close to the

underside of the roof, the suspension of the driver’s

seat or an accident may cause the head to strike the

overhead guard.
To avoid head injuries, a minimum distance of

40 mm must be ensured between the underside of

the roof and the head of the tallest operator.
To determine the actual head clearance, the opera-

tor must sit in the driver’s seat and the seat suspen-

sion must be set to this driver’s requirements.
Due to the individual nature of height and body

weight as well as the wide variety of types of driver’s

seat and overhead guard, the minimum head

clearance must be ensured in every truck.

The driver’s compartment has been designed

taking ergonomics in the workplace into

account and in accordance with EN ISO 3411.

In general, from the seat position, the operator

has sufﬁcient space to reach the operating

devices safely, to operate the truck and to view

the outline of the truck. Operators whose body

size deviates from the speciﬁed dimensions

on which EN ISO 3411 is based must be

individually considered by the operating

company.

384

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды