Still RX60-16 Скачать руководство пользователя страница 293

Страница: 293 / 412

Operation

Handling the battery

– The battery door must remain open during

charging.

– Expose the surfaces of the battery cells.
– Do not place any metal objects on the

battery.

– Open any protective structures fully (e.g.

fabric-covered cab).

– Have ﬁre extinguishing equipment ready.

Battery weight and dimensions

DANGER

Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the sta-

bility of the truck. When replacing the battery, the

weight ratios must not be changed. The battery

weight must remain within the weight range speci-

ﬁed on the nameplate.
– Do not remove or change the position of ballast

weights.

– Note the battery weight.

Service the battery

The cell covers of the battery must be kept dry

and clean.
Terminals and cable shoes must be clean,

lightly coated with battery grease and tightly

screwed.
– Neutralise any spilt battery acid immedi-

ately.

– Observe the safety regulations for handling

battery acid; see the chapter entitled

"Battery acid".

170525 EN - 10/2016

281

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды