Still RX50-10 Скачать руководство пользователя страница 229

Страница: 229 / 374

Operation

Operating the display and operating unit

7312_003-056_en_V3

ESC

Adjusting the displays

NOTE

The parking brake must always be engaged

when you adjust the displays. The displays

cannot be adjusted if the parking brake is not

engaged.

NOTE

When adjusting the displays, do not actuate

the hydraulic system operating devices. If you

do, entry is interrupted and the display returns

to the operating display.

The displays are adjusted in the

CONFIGU-

RATION

menu.

– Turn the key switch to position "I".
– Press the drive program button (1) and the

menu change button (2) at the same time.

The display changes to the

PASSWORD

menu.

– Press the return key (3).
The display changes to the

CONFIGURA-

TION

menu.

The following settings are possible and can be

found in the corresponding chapter:
• Setting the date and time
• Resetting the daily kilometres and daily

operating hours

• Setting the language
• Conﬁguring Blue Q

Symbols in the display

Messages

To show operating messages, warning

messages or error messages in the display,

text messages and symbols are used.

55048011501 EN - 12/2015

217

Содержание RX50-10























































































































































































































































































































































































Результаты поиска

Содержание RX50-10

Отзывы:

Бренды по названию

Популярные бренды

Still RX50-10, Оригинальное руководство пользователя

Результаты поиска

Содержание RX50-10

Отзывы:

Бренды по названию

Популярные бренды