Still RCG40 Скачать руководство пользователя страница 57

Страница: 57 / 180

CAUTION

After hanging the slings from the lifting hook, the

safety lock (4) must be fastened. The slings must not

touch the overhead guard or any other installed

equipment when the truck is being lifted.

DANGER

The overhead guard will be damaged if it is contac-

ted by lifting equipment that is under tension from

lifting. This can result in later failure of the over-

head guard and the risk of severe injury or death.

Ensure that no part of any lifting equipment con-

tacts the overhead guard during lifting.

Commissioning the truck

CAUTION

Do not use the forklift truck before it has been com-

missioned by a service engineer authorized by the

manufacturer.

CAUTION

The forklift truck may be commissioned only by a

service engineer authorized by the manufacturer.

Use and Operation

Truck transport and lifting

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды