Still RCG40 Скачать руководство пользователя страница 109

Страница: 109 / 180

Determining the actual total weight

–

Park the truck securely.

–

Determine the unit weights by reading the

truck nameplate and, if necessary, the at-

tachment (variant) nameplate and, if neces-

sary, by weighing the load to be lifted.

–

Add the determined unit weights to obtain

the actual total weight of the truck:

Tare weight (1)

+ Ballast weight (variant) (2)

+ Attachment net weight (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for driver
= Actual total weight

–

Drive the truck with the forks forwards into

the lift without touching the shaft walls.

–

Park the truck securely in the lift to prevent

uncontrolled movements of the load or the

truck.

Driving on loading bridges

DANGER

Risk of accident if the truck crashes!
Steering movements can cause the tail end to veer

off the loading bridge towards the edge. This may

cause the truck to crash.
The lorry driver and the truck driver must agree on

the lorry's departure time.

–

Before driving across a loading bridge, ensure

that it is properly attached and secured and has a

sufficient load capacity (lorry, bridge etc.).

–

Drive slowly and with care on the loading bridge.

–

Ensure that the vehicle onto which you will be

driving is secured to prevent it from shifting and

that it can support the load of the truck.



6210_001-010



Use and Operation

Handling loads

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды