Still R70-40T Скачать руководство пользователя страница 45

Страница: 45 / 288

Safety

Safety regulations when handling consumables

WARNING

Battery acid contains dissolved

sulphuric acid. This is corrosive.
– When working with battery acid,

always wear protective clothing

and eye protection.

– Do not allow any acid to get onto

the clothing or skin or into the

eyes; if this does happen, rinse

immediately with plenty of clean

water.

– In case of injury, seek medical

advice immediately.

– Immediately rinse away spilt

battery acid with plenty of water.

– Follow the statutory regulations.

ENVIRONMENT NOTE

– Dispose of used battery acid in line with the

applicable regulations.

Coolant

WARNING

Coolant and coolant additive are

hazardous to health.
– Store only in original vessels, do

not spill.

– Never use empty food containers,

bottles or other vessels for storing

coolant.

– The legal regulations must be

observed.

ENVIRONMENT NOTE

– Immediately remove escaped coolant with

an oil binding agent and dispose of in line

with the regulations.

– Dispose of used coolant in line with the

regulations.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды