Still R70-40T Скачать руководство пользователя страница 39

Страница: 39 / 288

Safety

Safety regulations when handling consumables

Permissible consumables

WARNING

Consumables can be dangerous.
Follow the safety regulations when handling these

substances.

Refer to the maintenance data table for the

permissible substances necessary for op-

eration. (See ⇒ C hapter "Ma intenance data

table", P. 6 -186).

Oils

WARNING

Oils are flammable!
– Comply with applicable legal

regulations.

– Do not allow oils to come into

contact with hot engine parts.

Do not smoke!

WARNING

Oils are toxic!
– Avoid contact and consumption.
– If oil mist or vapours have been

inhaled, seek fresh air.

– If oil comes into contact with the

eyes, flush thoroughly (at least 10

minutes) with water and then seek

medical assistance (e.g. from an

ophthalmologist).

– If oil is swallowed, do not induce

vomiting, but rather seek medical

assistance immediately.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды