Still R70-40T Скачать руководство пользователя страница 199

Страница: 199 / 288

Maintenance

Safety instructions for maintenance

Working on the ignition system

To prevent personal injury and/or destruction

of the ignition system, please comply with the

following:
• Attach/remove leads, including, high-volt-

age cables and measuring instrument

leads, to/from the ignition system only when

the ignition system is off.

• If the engine is supposed to crank at starting

speed but not actually start (e.g. for a com-

pression pressure test), separate the plug

connector from the ignition coil.

• Use of a quick charger to jump start the

engine is only permitted up to 1 minute with

max. 16.5 volts.

• The engine may only be washed when the

ignition is switched off.

• When performing electric or point welding,

completely disconnect the battery.

• Trucks in which there is a defect in the igni-

tion system or one is suspected may only

be towed if the plug for the ignition coil is

unplugged.

Working on gas fuel (LPG) system

DANGER

Risk of explosion!
Note safety regulations for working

with LPG ⇒ Chapter "LPG", P. 3-30.

The condition of the entire gas fuel system

must be kept under constant surveillance to

ensure safety of operation , in particular in

terms of leakage. It is not permitted to use

vehicles if the gas system has leaks. When

checking for leaks, soapy water, a solution of

Nekal or other foaming products should be

used.

DANGER

Risk of explosion!
It is not permitted to inspect the

gas system using a naked flame

for illumination.

171673 [EN]

189

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды