Still R70-40T Скачать руководство пользователя страница 14

Страница: 14 / 288

Foreword

Information about documentation

This operating and maintenance manual must

be drawn to the attention of staff responsi-

ble for the operation and maintenance of the

trucks.
The operator (see ⇒ Chapter "Definition of

terms used for responsible persons", P. 20)

must ensure that all users have received, read

and understood this manual.
Thank you for reading and complying with this

manual. For further information or improve-

ment suggestions, or if you have identified

errors, please contact our service centre.

Issue date and currentness of man-

ual

May 2007
STILL is constantly engaged in the further de-

velopment of industrial trucks. Please note

that these operating instructions are subject to

change and any claims based on the informa-

tion and figures contained in these operating

instructions cannot be asserted.
If you require technical support for your in-

dustrial truck, please contact the responsible

service centre.
We hope you enjoy your driving
STILL GmbH
Berzeliusstr. 4
22113 Hamburg, Germany

This manual - and any excerpts thereof - may

not be reproduced, translated or tansmitted in

any form to third parties without the express

written permission of the manufacturer.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды