Still R70-40T Скачать руководство пользователя страница 116

Страница: 116 / 288

Operation

Working with loads

7090_001-007

Transport of swinging loads

Contact your national regulatory authorities

(trade associations in Germany) prior to trans-

porting swinging loads.
National regulations may place restrictions on

these operations. Please contact the authority

responsible.

DANGER

Swinging loads can result in the following risks:

• Reduced braking and steering action,
• Tipping over the wheels or drive wheels,
• Tipping of the truck transverse to the direc-

tion of travel,

• Risk of crushing of guide persons,
• Reduced visibility.

DANGER

Loss of stability due to slipped, unstable or, in parti-

cular, hanging loads!
The following information should be noted when

transporting hanging loads:

• Swinging of the load is to be prevented by

using the proper driving speed and driving

manner (careful steering, braking).

• Hanging loads can only be coupled to the

industrial truck so that the load-securing de-

vice cannot shift or release unintentionally

and cannot be damaged.

• Ensure that there are no persons in the

direction of travel in the driving lane.

• Ensure that swinging loads do not put per-

sons at risk.

• When transporting hanging loads, suitable

devices (e.g. guy wires or hand rails) are

to be made available and used by guide

persons.

106

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды