Still R70-40T Скачать руководство пользователя страница 115

Страница: 115 / 288

Operation

Working with loads

WARNING

Risk of injury
The forks must not be stepped on.

WARNING

Risk of injury
Do not step under the raised forks.

WARNING

People can be injured in the hazard area of the

forklift truck.
No persons should be in the hazard area of the

forklift truck, except the driver in his normal ope-

rating position. Stop work with the forklift truck

immediately and secure the forklift truck against un-

intentional use by unauthorised persons if persons

do not leave the hazard area despite being warned.

DANGER

Risk to life from falling loads!
Never walk or stand underneath

overhead loads.

6327_003-009

Transporting pallets

Loading units (e.g. pallets) are generally to be

transported individually. Simultaneous trans-

port of several loading units is only allowed
• when instructed by the supervisor and
• when the technical requirements have been

met.

The driver must ensure proper condition of

the loading unit. Only safely and carefully

positioned loading units may be transported.

171673 [EN]

105

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды