Still R70-40T Скачать руководство пользователя страница 114

Страница: 114 / 288

Operation

Working with loads

Carrying loading units

To ensure secure supporting of the load, it

must be ensured that the fork arms are suffi-

ciently far apart and are positioned as far as

possible under the load.
If possible, the load should rest on the back of

the fork.
The load may not protrude significantly be-

yond the fork tips and vice versa.
Loads are to be carried and transported as

close to the middle as possible.

DANGER

Risk of accident!
When transporting small items, attach a safety gu-

ard (special equipment) to prevent the load from

falling on the driver.
A closed roof covering (special equipment) should

also be used.
Removable roof segments may not be removed.

6210_842-001

Setting forks

– Lift stopping lever (1) and move the fork

arms to the desired position.

– Allow the stopping lever to snap back into

place.

The centre of gravity of the load must be posi-

tioned between the fork arms in the middle.
– Only operate the fork arm adjustment (spe-

cial equipment) when the forks are not

loaded.

Hazard area

The hazard area is the area where persons

are endangered by movements of the forklift

truck, its working equipment, its load-carrying

equipment (e.g. attachments) or the load.

Included in this area is also the area which can

be affected by a falling load, or by lowering or

falling working equipment.

104

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды