Still LXT 120, Оригинальное руководство пользователя

Страница: 87 / 324

Access authorisation with PIN
code (variant)
Industrial trucks equipped with the "Access
authorisation with PIN code" variant are pro-
tected against unauthorised use by a PIN
code. Individual PIN codes can be specified
so that the same industrial truck can be used
by different drivers.
An initial PIN code of "11111" is preset at the
factory for the first use.
NOTE
We recommend that the fleet manager
changes this PIN code using their access au-
thorisation. See also the section entitled "Ac-
cess authorisation for the fleet manager (var-
iant)".
When the key switch is switched on, the
Access authorisation
input menu ap-
pears.
All hydraulic functions and drive functions of
the industrial truck are blocked. In the StVZO
(German Road Traffic Licensing Regulations)
variant, the function of the hazard warning
system (variant) is guaranteed.
–
To activate the blocked functions, use the
softkeys to enter the PIN code.
–
To confirm, press the button.
If the input was correct, the display changes to
the main display. The industrial truck is ready
for operation.
–
If the input was incorrect, enter the PIN
code again.
NOTE
The authorised service centre can configure
access authorisation so that the PIN code
has to be re-entered each time after someone
leaves the industrial truck.
When the driver's seat is occupied again, the
message
Log in
appears. The display
then changes to the "Access authorisation" in-
put menu.
6219_003-196_V4_en

Operation
4
Display-operating unit
75 50078078001 EN - 07/2022 - 04