Still LXT 120 Скачать руководство пользователя страница 280

Страница: 280 / 324

–

The belt tongue (2) must release when the

red button (4) is pressed.

–

The automatic blocking mechanism must be

tested at least once a year:

–

Park the industrial truck on level ground.

–

Pull out the belt with a jerk.

The automatic blocking mechanism must

block the extension of the belt.

–

Tilt the seat at least 30° (if necessary, re-

move the seat).

–

Slowly extend the belt.

The automatic blocking mechanism must

block the extension of the belt.

Cleaning the seat belt

–

Clean the seat belt as necessary, but with-

out using chemical cleaning materials (a

brush will suffice).

Replacing after an accident

As a rule, the seat belt must be replaced after

an accident.

Checking the driver's seat

WARNING

Risk of injury!

–

After an accident, check the driver's seat with at-

tached restraining belt and fastening.

–

Check the controls for correct operation.

–

Check the condition of the seat (e.g. wear

on the upholstery) and secure fastening to

the hood.

WARNING

Risk of injury!

–

Have the seat repaired by the service centre if you

identify any damage during the checks.

7090_342-005



6327_342-010



Maintenance

Preserving operational readiness

268

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды